High Insulation Nano Ceramic Window Film

Although the weather is getting colder, sunlight can still bring trouble to driving, not only affecting the visibility of car owners, but also easily tanning their skin. There is no privacy in the car, and accessories are also prone to fade and aging, which is detrimental to the safety of glass. If the correct film is applied to the glass on the car, it can effectively reduce all kinds of troubles caused by sunlight and driving. So, how do car owners choose car films?

01 Look at the color

The color of the sunshade film is uniform and soft, without uneven color differences in the depth of the waves. When viewed from the inside of the car, the scenery naturally does not change color. The common color film is to directly melt the color into the adhesive film, tear off the upper layer of plastic paper, and then vigorously scrape the adhesive surface, causing the color to fall off. Ordinary color film can also fade when gently wiped on the ground.

02 Smell the smell

The residual solvent in the adhesive layer of inferior films has a high content of benzene and can have a peculiar smell; A good film has been professionally processed before leaving the factory, with a low odor. If conditions permit, you can take a small piece of car film, tear open the transparent layer, and smell for any irritating odor.

03 Look at indicators

Generally, the thermal insulation rate of the sunshade film should reach about 90%, the UV barrier rate should generally not be less than 98%, and the transparency can reach 70%. When selecting, car owners can look far through the sunshade film, and the effect of inferior products is very blurred. Films produced by regular manufacturers have a longer warranty period, usually 5 years.

04 Touch feeling

Generally, the thickness of the safety sunshade film is not less than 2 mils, so it feels thick and smooth to the touch. Due to insufficient thickness, ordinary color films have a thin and brittle feel, and are prone to leaving traces on the film.

summary

Specifically, the film must be applied indoors to avoid adhering sand particles or fine dust between the film and glass, otherwise pockmarks and bubbles will appear, affecting the vision and film effect. After applying the film, the car owner should check and accept it, for example, to see if there are any small particles and bubbles in the entire insulation film. If there are too many particles and bubbles, the staff can be asked to reapply the film; Check whether the edges and corners are firmly adhered, as they are the easiest to enter particles, and also the most test for the level of film application of the staff; Finally, sit in the car and see if there are any areas that affect your vision.

In short, car owners must not seek to save time or be greedy for cheap, otherwise their health will be harmed.

Reevoo Optics has perfect fluorescence rate, 100% uv resistance, strong aging resistance and protection. It using nano-metal oxide dispersion and polymerization technology, mixing nano-ceramic materials into PET base material particles via bidirectional stretching to film, and is different from other factories in coating nano-ceramics on PET surface, which makes the product performance unprecedented stable.

Hot Tags: high insulation nano ceramic window film, China high insulation nano ceramic window film manufacturers, suppliers, factory