Sun Protection Solar Window Film

Essential membrane selection tips for car owners

Before purchasing the film, the car owner knows that reflective sunshade films are not allowed for all windows, and that the light transmittance of the front windshield glass after the film is applied must be greater than 70%.

When purchasing a film, car owners can simply judge its quality through the following points:

Viewing clarity

High quality film, regardless of color depth, has high clarity, and does not cause unclear vision, while inferior film will have a misty feeling.

Feel the touch

High quality film has a thick and smooth feel, while inferior film has a thin and brittle feel and is prone to wrinkling.

Smell the taste

After tearing off the protective layer, the inferior film will have a pungent smell, while the high-quality film uses environmentally friendly adhesive, which basically has no flavor or a slight glue smell.

Observe bubbles

When the lining of the film is torn apart and re bonded, the inferior film will blister, while the high-quality film remains intact after being bonded.

After applying the film, pay attention to small details

Pay attention when encountering bubbles

After finishing the film application, the car mainly checks the effect of the film application. If bubbles are found between the film and the glass, the staff should be required to rework immediately. Because once it exceeds 24 hours, the attached film becomes difficult to handle.

Pay attention to the method of car washing

After applying the film, the vehicle owner needs to wait for the moisture between the film and the glass to dry thoroughly before cleaning the vehicle. The time is approximately 2-3 weeks.

When cleaning the vehicle, use a clean and soft cloth to clean it to avoid scratching the film surface. At the same time, never use a solution containing alcohol to clean the glass film, which may cause the film to fall off. Recommend going to a professional store to clean your car.

Don't open the car window carelessly

After applying the film to the front and rear windshields, be sure to carefully protect the edges of the film to prevent the film from falling off or dirt entering. It is best to wait 3 days for the film to be applied before opening the side window, and try to open it as little as possible within the next 2-3 weeks to prevent the edges of the film from being accidentally removed, causing damage and contamination.

Reevoo Optics adopts chip dyed base materials, which is the unique production technique of professional colored PET. Our products are produced on the world highest-level line -- SPUTTER, which helps overcome the limitation on colors and functions of traditional optics, while also improves the industrial level of glass films. The sputtering line also fundamentally meets the demands of the architectural films.

Hot Tags: sun protection solar window film, China sun protection solar window film manufacturers, suppliers, factory