Tarpaulin Five Steps Cover The Cover Method

Tarpapper that cover the use of tarpaulin is very critical, responsible personnel must have enough attention, below we understand the next.

1, tarpaulin front (lumbar outwards) vertical cover, waist rope on the side of the platform.

2, the rope rope bundle: the tarpaulins each end of the two angle rope were taut, so that the pendulum angle to the outside into a triangular shape. After the two sides of the cloth angle flat to the truck side of the wall, at both ends of the vehicle tightly wrapped angle, through the pressure rope, portable hook or hand brake lever inside, was X-type tension, were bundled at both ends of the vehicle T-iron.

3, waist, side rope bundles: the middle of the car with a small iron, tarpaulins in the middle of the waist, side rope were bundled in the middle of the car T-iron; the middle of the car without T-iron, tarpaulins in the middle of the waist, Bundled in the middle of the car near the T-iron. Other waist, side rope, from the vehicle at both ends, toward the middle of the vehicle, the order tied to the corresponding T-iron.

4, the end of the rope bundle: tarpaulins at each end of the two ends of the rope, should be tightened closed mouth, through the hand hook or hand brake lever, were tied vertically at the end of the vehicle two T-iron.

5, the pressure rope tied: tarpaulins on each side of the pressure rope, should be pressed tarpaulin angle tightening, so that tarpaulin close to the vehicle side wall, were bundled in the side of the car on the T-iron.

The safe use of the tarpaulin is very important, and we will be able to grasp the work of the way.